Save 40% when you buy 18V Lithium-Ion Cordless Makita BDF452HW Driver-Drill today with 3-year warranty on tool and free shipping.

Makita BDF452HW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit

Brand: Makita
Feature

    * Makita-built 4-pole motor delivers 450 in.lbs. of Max Torque, with a variable 2-speed all metal transmission (0-400 / 0-1, 500 RPM) for a wide range of applications
    * Compact, ergonomic design; only 8 inches long and weighs just 3.5 lbs
    * Built-in L.E.D. light illuminates the work area
    * Makita LXT Lithium-Ion battery and Energy Star rated 15-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
    * 3-year warranty on tool; 1-year warranty on battery and charger


Product Description
What’s in the Box
1) Makita BDF452HW 18V Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill.
2) 2 18V compact lithium-ion batteries.
3) 15-Minute Rapid Optimum Charger.
4) Tool case.

The Makita 18V Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill delivers power and performance in a compact size. The compact driver-drill delivers 450 in.lbs. of Max Torque and 285 in.lbs. of PTI Torque, yet it weighs just 3.5 pounds. And the BDF452HW’s 18V compact lithium-ion battery charges in only 15 minutes for less downtime.

Try our new compact 18 Volt Lithium Ion Driver Drill kit. Makita built 4-Pole motor design with dual steel ball bearings lasts 5 times longer and delivers 450 in./lbs. of torque. 18 Volt power with 12 Volt weight, Lithium-Ion battery technology offers the longest run times, twice the battery life and is 40 percent lighter than competitive 18 V driver drills, weighs only 3.7 lbs. Kit batteries charge in only 15 minutes!

Makita BDF452HW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit Review
After using this drill for several months, I still think it is the best drill/driver in this price/usage range. The batteries are excellent and the available power continues to satisfy me. This drill is lightweight, reliable, feels like quality and has the umph to drill even 2″ Rock Maple and drive 2″ lag screws into the same Rock Maple with no sweat. After living with it, I’d buy it again!

So, it’s not an industrial tool, but it gets the job done around the house. If you’re a contractor, you should probably opt for their professional in (cases are usually blue instead of this ugly silver). For example check out the BDF451. That’s an industrial tool which will probably (hopefully) be more reliable, has more power, and should be more precise. The silver stuff is made in China. However, not to hold that against them, it performs rather well. It has decent power. I returned it because the spindle doesn’t exactly spin perfectly on axis (so you get a bit of wobble when driving screws, and skipping since it doesn’t sit straight in the screw head as it turns). I have the BDF451 on order, and have higher hopes for it even though I am just a homeowner.

After nearly two years of heavy use my husband has stolen my drill from me. He loves it. Last weekend, he drilled through a steel beam in the basement. He’s hard on stuff, but the Makita drill has held up superbly. The batteries charge quickly as claimed too. I’d definitely buy this drill again.

I pretty much agree with all the glowing comments and praise. (By the way, why would you specifically buy an ultra compact drill for the task of mixing thin set–a task traditionally assigned to a low RPM high torque brute of a drill). I do wish that Makita had provided 1 or 2 holders for 2″ driver bits. They are hard to do without for our operation. The existing attachment points at the base of the handle meant for securing the belt clip (how do you get one of those?) could be used for securing a bit holder that doesn’t yet exist. How about it Makita? Alternatively, some clever entrepreneur could design and market this accessory. After all, it is clear that Makita is going to sell a gazillion of these near-perfect drills.

We purchased this tool to install the boards on our deck. The tool runs through almost any wood – so you need to be careful not to go too deep (lack of torque control so operators need to practice to avoid sinking screws too deep). Battery life was less than expected – fortunately we had two batteries so while we used one, we charged the other. My only other complaint is that the beasty toy has been destroying my quick release bits (why I’m online tonight). If you get this tool, you’ll want to invest in some good quality bits. Also, you can expect some noise (woodpecker on steroids) when the tool starts to get serious about putting the screw in so ear plugs are recommended.

Frequently Bought Together
Makita 784874-A Ultralok 15-Piece Drilling and Driving Set
+
Makita 784869-A Shorty 3-1/8-Inch Bit Tip Holder with 12-Bit Tip Assortment
+
Makita LCT300W 18-Volt Compact Lithium-Ion Cordless 3-Piece Combo Kit

++

Reccommend Buy

Tagged with: •

Filed under: Drills • Makita • Power Tools

Like this post? Subscribe to my RSS feed and get loads more!