Order Now! Save 40% & Free Shipping Off Makita GD0601 1/4-Inch Die Grinder, Reviews Following seven years the plastic housing in the tip of my Makita Die Grinder broke so it was time for an upgrade. I use the grinder having a cut off wheel for cuts too little to fit into a saw and for deburring welds. This model could be the designated replacement and is a lot larger and heavier. Some of this weight is as a consequence of replacing plastic with metal, and some towards the heavy rubber shock absorbing materials.

I was initially taken aback by the weight but soon after utilizing it for some weeks the enhancements are really worth the difference in weight. The rubber materials absorbs many the vibration as well as the weight is very well balanced. The old model had the switch at the rear and it was not possible to turn it on or off wearing gloves whereas the switch on this model is really handy and easy to use with gloves.

Unless you’ve a enormous compressor, do not buy an air driven die grinder, get one of those. Just after a lot of years of use and abuse, my Craft man D.G. ultimately bit the dust. I attempted an air driven one, but a 33 gallon compressor cannot retain up. So far the Makita has worked wonderful, extremely powerful – does not bog. I’d have offered it five stars, but I prefer to see how lengthy it lasts. Even when I have to buy one every 2 years, it really is a hell of a good deal improved and more rapidly than waiting for the compressor to catch up!

Strong substantial style fits in your hands with self-assurance. Impressive tool with room to spare on torque. Will match or beat any air powered tool available. Would advise to anyone, specialist or amateur.

(asin:B001ASC73E)

Frequently Bought Together

Order Now! Save 35% with Free Shipping Off Ingersoll Rand 3108K Composite Pneumatic Die Grinder Kit with Carbide Burrs, Reviews I have never owned a kit like this before, so I have absolutely nothing to evaluate it to. It works fantastic although. It is small to be able to get in these hard to reach areas. I make metal decorative tables, and this permits me to grind off these weld marks for a expert appear. The only downside I’ve is the wrenches. I have used them about three occasions, and they’re already rounded off. I just use two metric wrenches to do the change over.

The variety of bits is sufficient for just about any kind of grinding you made need to do. This tool feels very properly made, therefore some may think it’s a little heavy. Well worth the money. This takes welds down much quicker than an angle grinder having a wheel. It does not nevertheless leave as smooth a surface as a whell does. You will still need a wheel grinder to smooth out it you really want a great finish. I purchased this item cheaper on Amazon than others had just the tool for sale. You won’t be displeased.

This Die Grinder has excellent fit and feel in your hand. It is light, quiet, and has plenty of energy. Technically, 1/3HP! This kit comes using the burring bits. It all fits nicely in the protective case. I’m very impressed with the kit. Ingersoll Rand includes a long term consumer! Oh and one other thing I want to mention. In an additional evaluation of the 3108 Die Grinder (non-kit version) a guy named Benjamin Wilber, describes two or 3 issues with the die grinder. Do not LISTEN TO HIM.

He says the bearings really feel bad and blah blah blah… This guy obviously has numerous other issues apart from his die grinder. I’m a machinist within the aviation field myself and these tools, 3108 and 3102, are excellent tools. They’ve no bearing issues and they’ve variable speed. You control the speed by how far you pull the lever. Just like an accelerator inside a car! Please don’t let this guy’s external problems mislead you from a great tool!

(asin:B000DZGMPO)

Frequently Bought Together

Order Now! Save 45% with Free Shipping Off Makita 9910X 5.6 Amp 3-by-18-Inch Belt Sander with Cloth Dust Bag and 5 Sanding Belts, Reviews I have utilized the Makita 9920 only to rough sand about 20 cedar boards. It sounded a tad underpowered considering the softness of the cedar, nevertheless, it did an outstanding job both in sanding and in collecting the sawdust. I’m quite pleased with its performance overall and recommended it extremely.

This sander replaced a crappy DeWalt that lasted for 2 seconds. And all I can say is: Awesome! The only factor I can believe of that would stop me giving it five stars is that it does not come with a case. For my first project, I produced the beginner error by not securing the object that was going to be sanded towards the table. I believed that because the bin was fairly big and heavy it would be fine but this sander shot the potato/onion bin ac cross the workshop, so it does have more then sufficient energy. After the Dewalt debacle, I won’t buy anything else but Makita anymore. I’ve very a couple of Makita tools for some years now and never ever had an issue with any of them.

I’m pleased with this buy. It appears to be properly produced and has plenty of energy. It is single speed, but that is not an issue. The belt tracking is great. On my old Wen sander I had to be constantly fiddling using the tracking manage. On the Makita I’ve by no means touched the tracking, it stays right on. Not sure how the auto tracking works, however it is great. Those 5 sanding belts that include the sander are a good touch also.

Great Sander, powerful and removes wood fast, rather heavy but all belt sanders are heavy tools. The attached bag works well and has to be emptied frequently. If utilized on quick speed sometimes it tips and will gouge the wood irreparably so one must be careful to help keep it flat whatsoever times, regardless of the speed. I utilized it on a huge teak swim platform and did a great job, With any other sander I’d nonetheless be there sanding !! not a pleased believed in freezing climate!!

(asin:B0002HC3YW)

Frequently Bought Together

Order Now! Save 40% Off DEWALT DW758 8-Inch Bench Grinder with Free Shipping, Reviews It can be a heavy duty grinder and I bought it at a really good cost after watching it for a although. Out of the box, both wheels ran extremely correct. Nonetheless, I wanted to put on a wire brush, so I removed each wheels, place the coarse one on the left and the wire wheel on the right. It is quite tricky getting the wheels tight again due to the fact you must hold each nut on the opposite ends and as soon as you start to tighten one nut, then the other one begins to loosen. They go onto the arbor in reverse of each other.

Also, I observed that there is now a slight wobble in both the wire wheel bench and also the grinding wheel that I place on the left side. Somehow they were in a position to get them to run correct in the factory, but I installed and reinstalled a lot of instances, but still get the same slight wobble. Its not a large deal, but it’s noticeable at slow speed prior to it truly winds up. Also, don’t have any loose objects on your bench when these get up the speed. They blow a great deal of air and have a fair quantity of vibration.

This is actually a fairly nice grinder. The hardware for the assistance shelf, the wheel housing and the eye shield are considerably superior than most. My only complaint is that the grinding wheels have quite considerable wobble. I tried loosening and repositioning them a couple of times. I finally discovered the predicament, the washers on each and every side of the wheels are stamped as opposed to machined and not truly true. They don’t hold the wheels accurate.

(asin:B0000224J4)

Frequently Bought Together

Order Now! Save 35% Off DEWALT DW756 6-Inch Bench Grinder with Free Shipping, Reviews I’ve nothing negative to say concerning the grinder for those who don’t consider the wheels as component of the grinder. Wheel Troubles: Wheels had been not balanced which produced a slight vibration. Wheels also had about 1/16 inch run out side to side. (both wheels) Removing one wheel letting the heavy spot rotate towards the bottom, then did the same with the other wheel. I marked the heaven spot on every wheel and them rotated them so the heaven spots were 180 degrees from one another. This could be the greatest it is possible to do for out of balance wheels without removing or adding weight. For the left to appropriate run out, like other reviews, I marked and added small pieces of electric tape towards the back plate of the wheels till they were running accurate. This is often a grinding wheel challenge and NOT a grinder predicament. My guess is the fact that the manufacture just slaps wheels on and ships.

This was bought as a birthday gift for my husband in anticipation of his new workshop now that he has retired. He picked it out but didn’t realize I was ordering it. It arrived in best condition, and he has it all setup in his existing workshop. He states that keeping your tools sharpened makes all the difference in the globe in their efficiency. The Amazon cost was the perfect we observed anyplace.

The grinder operates as stated. This is the very first grinder I owned. Therefore, I will need time to attempt it for a better response. To hold the blade properly without having the motor within the way, is actually a dilemma. Producing the correct angle constant with the length of the blade desires to be deliberated. The additional familiar I’m, the superior it will be.

(asin:B0000224J3)

Frequently Bought Together

Order Now! Save 50% Off DELTA GR275 6-Inch Variable Speed Grinder & Tool-Less Change with Free Shipping, Reviews Amazing delivery by Amazon, ordered it on Saturday afternoon and received it Monday morning. Somehow Amazon is obtaining its elves and FedEx to work the weekend. No I did not ordered with something much more special than Amazon Prime. I justified this invest in by saying that it would pay for itself. Soon I will sell the wife’s golf clubs which had accumulated the typical wear and tear but nothing dramatic. I knew that if I could give them a proper buffing job I could bring them back to “nearly new” having said that to complete meant obtaining a new tool.

I know this simply because my left grinding wheel was too tight such that the supplied wrench and one more one I had would only bend when faced using the torque required to budge the nut. Luckily I had some large Channelock pliers I could use on the significant washer under the fast release nuts and broke it loose having a screwdriver as advised in the manual. Releasing the levers on the tightly screwed nut had no impact on decreasing the disassemble torque.

I don’t really see this as a problem as I had low expectations of the function and knew that I could take it apart employing the common techniques utilized with these tools. Please note that the manual does not mention within the section on replacing wheels that the left nut is left handed along with the suitable correspondingly right handed. The elements list does refer to them as LH and RH but these abbreviations could quickly be understood as locational references not their handedness. For one not experienced with these tools it’s a truth that may be vital to don’t forget.

I bought this grinder primarily for sharpening my lathe tools and regrinding the odd bench chisel that gets a negative ding within the blade. I like that making use of the white wheel using the speed dialed down I can grind an edge without overheating the steel. Mine works fantastic and I’ve no complaints!

(asin:B0007WWHZC)

Frequently Bought Together

Best Price Work Sharp WS3000 Wood Tool Sharpener with Free Shipping, Reviews I’ve used this tool sharpener for several years and it has worked great. As a result of my own carelessness, I lately lost the tool rest and also the original DVD. I couldn’t discover them for sale on the internet so I emailed customer service. What an excellent service department. Inside 24 hours each were on their way to me at no charge! I wish all customer service departments had been this efficient.

This little machine is incredible, it’ll do in a couple of minutes what you’d take an hour to do on sharpening stones. Roughly half the price of all of the sharpening stones and other gear you would require to accomplish exactly the same outcome. Give this machine a serious look!

I’m thrilled with this sharpener. It’s not messy like my water wheel sharpener. I makes accurate bevels on my planer blades and chisels. It doesn’t take much time and skill to obtain very sharp tools.

Setup and use is intuitive and easy. I started with two chisels and a plane blade. Obtaining the edges back to a flat surface (from years of poor hand sharpening) took fairly a although. The sandpaper loaded up fairly quickly and absolutely stopped removing material. A single pass with the grit cleaner that came with the sharpener had it cutting like new. Once the chisels had been back to original shape I changed to ever finer grit disks to put on a razor edge. It was quick, simple, and dead on accurate.

I’m certain, as I have read, the pros who make their living with sharp tools might not discover this adequate for some reason. I’ve achieved is plenty sharp for me! And it was done quickly and consistently from tool to tool with out the aggravation of trying to maintain the proper angle on the old Arkansas stone. If you’re truly picky, maybe this is not for you. If you’re the typical Joe with a workshop in the basement or garage, I suggest it.

(asin:B000PVHIMW)

Frequently Bought Together

Buy Marshalltown VS792 Vacuum Hose Sander On Sale with Free Shipping, Reviews I’ve done lots of drywall in my home, I can’t believe I’ve waited so long to obtain one of these vacuum sanders. I’m amazed at how well it captures the dust. I’m taking a break from sanding as I write this and normally I’d be white as a ghost with drywall dust but the Marshalltown vacuum sander captures most likely 98 percent of it and I’m totally clean. The only drawback is the fact that using it could be a little physically taxing as it stays sucked against the wall so you have to put lots of muscle into moving it, but again, totally worth it for the cleanliness. I extremely recommend this item!

I was skeptical about how nicely this sander would function when I ordered it. I am not now! The adjustment for the vacuum suction is really a must for those who have a strong shop vac hooked to it. This sander will literally hold itself on the wall with my vacuum so I used the adjustment to reduce the suction. The sander worked so well that I had almost no dust to deal with following sanding the drywall patches. It was a vast improvement from my previous effort exactly where I had dust throughout the room I was operating in and some in the next one.

I purchased this for my home dry walling and found it to work nicely. Another reviewer commented on the slight concavity of the plate; I simply left an old sanding screen sandwiched under the new one within the sander and that took care of the flatness problem. The tightening nuts are too little and might be much more accessible, that and a too-short hose cost the sander a star. Otherwise a worthwhile product.

(asin:B000VXBYPQ)

Frequently Bought Together

Best Sale Milwaukee 6021-21 Random Orbit Palm Sander with dust collection bag with Free Shipping, Reviews I originally bought this thinking it would be a smaller hand sander I could use to finish some doors and cabinets. This thing is actually a monster and incredibly powerful. Deal of the century on Amazon. Within three minutes, my doors had been smooth and stunning. Most importantly, all parts of the sanding disk had been utilized, so there was no waste. Low-priced plus a money saver. If you are considering this or the DeWalt, this will be the one for you personally. It’s incredible

I’m using this to refinish the wood floors in a modest room. I’ve found it really uncomplicated to handle. I have arthritis and was concerned that it could be painful to use. It only takes a very light grip to guide it. The dust collector also functions much better than I expected. I expect that I’ll be making use of this in a number of other rooms inside the house.

I just bought this sander and I like it. It comes with a great challenging case which is big sufficient to ensure that you tend not to must be a rocket scientist to wind up the in some crazy way so that you can get it back in the case. The cord length is fantastic. Vibration just isn’t negative at all. You will not be disappointed with this sander, I really like it.

Far superior to the Porter Cable. The bag is way far better, and the variable speed is good. The cord is good and long, and even the case is greater than the Porter Cable. This will be the one to get! I was really pleased using the way it handled and sands, I by no means realized how handy the variable speed was until my final orbital bit the dust and I had to borrow a single speed from a buddy to finish a job. This was my very first Milwaukee however it won’t be my final, I was extremely impressed.

Extremely great sander for the money. I like this one superior than the Dewalt unit that expense all most twice as substantially. You can’t go incorrect with this sander.

(asin:B0012RWCF6)

Frequently Bought Together

Rockwell RK5101K Sonicrafter 37-Piece kit

Brand: Rockwell
Feature

* Safe cutting – unique high frequency osilation only cuts hard materials, so the users hands and fingers are much safer than a saw that rotates.
* Smooth running – there are no fast spinning parts or alternating blades creating movement of the tool, only a high requency oscillating action resulting in no kickbacks.
* Sonicrafter throws a very low level of dust whether you’re sanding, cutting or scraping.
* Up to the edge and corners – with Sonicrafter you can get into difficult to reach areas that is not possible with a corded saw or jigsaw or even most sanders.
* High sanding capacity – with virtually no force or downward pressure required.

Product Description
The Rockwell Sonicrafter is a complete workshop in just one tool! The Sonicrafter from Rockwell can make precise plunge cuts, sand in tight spots, flush cut dowels and plugs, polish metals, strip paint and wallpaper, remove old window glazing and caulk, remove rust from tools and furniture, scrape dried adhesives, cut branches, even clean up graffiti. The Sonicrafter also easily cuts drywall, cement board, aluminum and plastic gutters and downspouts, conduit, copper pipe, even vinyl siding. The list is endless and the tool really is simple to use. You’ll wonder how you ever did without it. All this is achieved by the unique high frequency oscillation of the tool head. It doesn’t rotate or orbit, making it a very user-friendly tool. This Sonicrafter 37-piece kit has variable speed and comes with a hex key, circle cutter, straight cutter, scraper, sanding polishing pad, 30 sanding sheets and a carbide grit segment saw blade in a convenient carrying bag.

Rockwell RK5101K Sonicrafter Review
I had seen a video promo on TV about this product and it does everything it promised. I especially love it for working on crown mouldings and baseboards as we live in a very old house and I am currently renovating….As a female hobbyist I find this tool very easy to use and to handle. I would recomend it as a must to any workshop.

I bought this product for a specific purpose (removal of a broken tile). It did the job well enough, but I found, as other reviewers have done,that the attachment screw worked loose very easily. This problem was reduced when I placed less pressure on the machine and let it do the job itself. I think it will prove to be a useful enough tool to have around, especially for smaller cutting and sanding jobs. However, it is expensive.

Used tool to cut door moulding bottoms in preparation for laying tile. Worked great!! Especially liked ability to mount blade at ~90 degree angle to get into a corner. Blade cut the moulding like butter. Initially, blade vibrated loose, but tightened the screw a little tighter and had no more problems. Tool is reasonably quiet–more of a low level hum than a buzz. Comes with decent case. Definitely would buy again.

I’ve used this tool while remodeling my bathroom this month. I cut an exact rectangle in the bottom of a cabinet to accommodate an air conditioning duct and it fit perfect. I used the scraper to get old lining paper out from the drawers. I sanded in tight places that I normally would have to do by hand. I have never had such an exact cutting and sanding tool like the Sonicrafter. This is the perfect tool if remodeling is the job your doing.

So, this is my first weekend with 37-pice Sonicrafter. The job is to strip layers of old paint from a metal radiator cover. I mounted the scraper on, dialed up the variable speed to recommended high and went ahead only applying gentle pressure. After 5 minutes I had to remove my hand from the metal front area. It became way too hot to touch. As a matter of fact, I would never use any other tool at this temperature. To Sonicrafter’s credit it didn’t produce any smoke and kept turning it off every 10-12 minutes. Contacted Rockwell’s Customer Service and was advised to exchange the unit. At this point I am not sure if exchange is the right way. Maybe I should shell out more dollars and step up to Multimaster?

Frequently Bought Together
Rockwell RW9123.3 Sonicrafter 1-3/8-Inch Precision End Cut Blade, 3-Piece
+
Rockwell RW9122.3 Sonicrafter 1-3/8-Inch Universal End Cut Blade, 3-Piece
+
Rockwell RK5102K Sonicrafter Deluxe 72-pc Kit

Fein MultiMaster FMM 250Q Top

Brand: Fein
Feature

* Includes: 1 FMM 250Q Quick change tool with variable speed in a plastic carrying case
* 1 Universal E-Cut blade, 1 HSS Segmented blade
* 1 Rigid Scraper Blade, 1 Carbide Blade, 1 Carbide Rasp
* 1 Dust Extraction Kit
* 1 Sanding pad and 15 sheets of sand paper, 1 Profile Sanding Kit

Product Description
MultiMaster Top multipurpose tool is ideal for sanding in tight corners as well as other manual tasks with the power and ease of a power tool. 12,000 to 21,000 oscillation per minute. 16.4′ cord length. Attached tool can turn fully around drive shaft. 2.4

Designed to help you complete both professional jobs and hobby projects, the Fein MultiMaster FMM 250Q Top is a multi-purpose system for interior fitting and renovation. This all-round package gives you the professional tools and accessories that you need to take on a wide range of hobbies, and interior fittings and renovation projects — from floor and tile work to renovating windows and cabinetry. It includes the MultiMaster FMM 250Q, featuring the tool-free QuickIN rapid clamping system that lets you change out accessories quickly while you’re on the job, and a sturdy plastic case.

Fein MultiMaster FMM 250Q Top Review
This is an expensive tool with expensive accessories, but in my opinion well worth it. I am an auto mechanic by trade and a homeowner that loves and appreciates quality time saving tools. Since my purchase 2 months ago I have used this tool to pattern cut and install a bath surround, cut and install plastic molding(using a simple adjustable square),trimmed out paneling while on the wall, removed a glued vinyl bathroom floor (with ease), plunge cut and removed damaged soffit material( with such precision that the removed wood could be used as a pattern for the new replacement wood)and scrape old paint off my house corners and soft fits. I am very impressed with the tool quality and ease of changing attachments. The profile sanding attachment works good. The storage box could be of better quality but it serves it’s purpose. If I were to purchase this again I would probably buy a bare bones kit and choose my accessories separately. I have some attachments I will probably never use and would gladly trade for more wood and metal cutting blades. Hope this helps you out!

After working for hours, trying to remove old carpet from our RV, I knew there had to be a better way. When I saw the advertisement for the Fein on television, I just had to give it a try. My husband thought I was nuts for spending that much on a tool, but when he used it to cut sheet rock for our new den, he changed his mind. We also used it when we remodeled a bathroom. It worked well for smoothing out the rough surface under the tile we had removed. The attachments are a little expensive, but worth it if you have a back breaking job to do. I’m so glad I took a chance, and purchased the MultiMaster.

My cousin let me borrow his and I was hooked. I bought one specifically to help with installing some replacement windows. The e-cut blade was superior to a reciprocating saw or hacksaw for cutting through nails to remove trim. You don’t have to worry about it plunging farther than you want. Scraper blade removes caulk with almost no effort.

I hemmed and hawed over this purchase for months before I talked to someone in a forum about it. They had the older, single speed model and loved it. I decided to go with that one, the “start” kit at about $180. I have no doubt that had I got this deluxe kit, or even tried the quick change version I would have been spoiled for life and could never go back to my bare bones model, but since I paid less than half for mine and have never known the sweet taste of VS or quick change blades I am as happy as can be. My advice is do not wait any longer to get a MM. It is worth it and you will not regret it, but if you can’t swallow the big price go for the older cheaper model. You will still be able to do everything you want this tool for, just not as luxuriously.

Buy This Product and Related Accessories
Fein 6-35-02-151-02-0 1-1/8-Inch Universal E-Cut Blade, 3 Pack
+
Fein 63502113019 3-5/16-Inch Flush Cut Wood Blade
+
Fein 63502097027 3 1/8-Inch Hard Material Blade for Sheet Metal, Hardwood, Fiberglass, and Carbon Fiber

Rockwell RK5102K Sonicrafter Deluxe 72-pc Kit

Brand: Rockwell
Feature

* Safe cutting – unique high frequency osilation only cuts hard materials, so the users hands and fingers are much safer than a saw that rotates
* Smooth running – there are no fast spinning parts or alternating blades creating movement of the tool, only a high requency oscilating action resulting in no kickbacks.
* Sonicrafter throws a very low level of dust whether your sanding, cutting or scrapping.
* Up to the edge and corners – with Sonicrafter you can get into difficult to reach areas that is not possible with a corc saw or jigsaw or even most sanders.
* High sanding capacity – with virtually no force or downward pressure required.

Product Description
The Rockwell Sonicrafter – a complete workshop in just one tool! The Sonicrafter from Rockwell can make precise plunge cuts, sand in tight spots, flush cut dowels and plugs, polish metals, strip paint and wallpaper, remove old window glazing and caulk, remove rust from tools and furniture, scrape dried adhesives, cut branches, even clean up graffiti. The Sonicrafter also easily cuts drywall, cement board, aluminum and plastic gutters and downspouts, conduit, copper pipe, even vinyl siding. The list is endless and the tool really is so simple to use. You’ll wonder how you ever did without it. All this is achieved by the unique high frequency oscillation of the tool head. It doesn’t rotate or orbit, making it a very user-friendly tool. This Sonicrafter deluxe 72-pc kit has variable speed and comes with a hex key, circle cutter, straight cutter, scraper, sanding polishing pad, 30 sanding sheets, carbide rasp triangle, detail sanding finger pad, 2 felt polishing pads and vacuum cleaning in a convenient carrying bag.

BRAND NEW Rockwell SoniCrafter 72 Piece Variable Speed Deluxe Professional Kit – The Rockwell RK5102K INCLUDES: Rockwell Sonicrafter, Hex key, 30 Finger sanding sheets, Semicircle saw blade, Scraper, End cut blade, Carbide grit segment blade, Sanding pad, 30 Sanding sheets, 2 Polishing pads, Finger sanding pad, Vacuum adapter, Triangular carbide grit rasp, Carrying bag.

Rockwell RK5102K Sonicrafter Deluxe 72-pc Kit Review
I had looked at the Fein Multimaster, but couldn’t justify the price. I bought the Sonicrafter specifically to sand between the rails of a baby crib I built for my daughter. This tool will see as much use as my random orbital sander! It’s very well made, and does a superb job. A couple of experiential comments: 1. The tool is a fast worker, let IT do the work for you. 2. The dust collection attachment gets in the way, and is useless. 3. I haven’t found a source for sanding pads that fit, except Rockwell, and they’re relatively expensive.

We are in the process of remodeling our kitchen. We needed a handy tool. Rockwell become kind of disappointment. It feel good in your hands. Looks solid. That is positive, on negative side: blades are expensive, cheaply made – becoming dull just after few uses. Tool gets hot really quickly. Blades are becoming loose after few uses, no matter how hard you try to tight them up. In conclusion I think this tool is design for small jobs and only occasional use not for serious jobs.

It seemed like the answer, but created another question…why would Rockwell attach it’s name to a tool that burns more wood than it saws?? The apparatus for attaching the various blades is suspect at best. I broke the segmented saw blade first time out. Other attachments kept coming lose as well. It’s not rocket science, but those items with a flush mount are suspect. Those with recessed mount are much better, i.e. the sanding attachment and carbide segmented saw blade. The head and blades do get very hot, and I wasn’t doing anything terribly complicated! It is a great sander, but the price is a bit high. There’s a reason why (when affordable) we opt for German engineering. Though I haven’t tried the Fein model, I know it’s blades attach differently (and hopefully) more securely!

In my admittedly limited use of the product so far, I have been very pleased with its versatility and usability. The weight of the product which, at first, seemed to be a liability, actually allows greater control of the tool by providing stability when cutting or sanding. Unlike a rotary tool (like a Dremel), the Sonicrafter stays where you put it and since the blade oscillates instead of rotating, it doesn’t generate nearly as much dust or debris. The contents of the 72 piece kit appear to be well thought out. The small sanding pad has been especially useful; allowing work in tight spaces without disassembling the project. I have not made use of the dust collection system included with the 72-piece kit, so I can’t comment on its efficacy except to say that it doesn’t interfere with the use of the Sonicrafter. I’ve been able to complete all my projects with it in place. A very solidly built and well thought out product.

Buy This Product and Related Accessories
Rockwell RK9000 Jawhorse
+
Rockwell Jawhorse RK9109 Plywood Jaw Accessory Attachment
+
Rockwell RW9123.3 Sonicrafter 1-3/8-Inch Precision End Cut Blade, 3-Piece