Fein 6-35-02-151-02-0 1-1/8-Inch Universal E-Cut Blade, 3 Pack

Brand: Fein
Feature

* For cutting Metal up to 1/32-inch
* For Cutting into Wood
* For Cutting into Plaster
* For Cutting into Synthetic materials
* For Cutting into Cardboard

Product Description
The Fein E-cut blades are created to use with the Fein Multimaster. They are designed to cut everything from wood, plaster, synthetic materials, and cardboard. They come in a convenient 3-pack of 1 1/8-inch thick blades. The flush cut design allows you to place materials perpendicular to your cut and are designed to increase the cutting speed on the Fein Multimaster.

MultiMaster universal e cut blade has flush cut design allows for flush cuts to in tight areas. Ideal for cutting metal up to 1 16″ thick. Can cut wood, drywall, and fiberglass. 1 1 8″ wide. No. 6 35 02 151 01 8: 1 per pack No. 6 35 02 151 02 0: 3 per pac

Fein Universal E-Cut Blade Review
Several reviews complain about the exorbitant cost of the blades for the Fein Multimaster. I compleatly agree with this. My solution was to start making my own. I bought a replacement dozuki blade, cut it in to three sections, welded each section to a piece of 16 gauge metal in which I had drilled the proper mounting hole. This week I was doing tile work so I bought a tungsten carbide hacksaw blade, cut off a couple inches and welded this piece of 16 gauge. These blades work Great! and at a small fraction of the cost Fein expects to get.

The Fein machine is the most versatile tool I have. The blades I purchased for it do what they claim to do–cut right through wood, laminates, drywall, and light metals. I wiuld have given them a five-star rating, but the pricing on these blades held me back. Great tool, but Fein has to do something about the cost of the blades.

As a remodeler and handyman, this producet can save countless hours of labor. It cuts through wood and hidden nails, screws and staples. Cutting out interior panels and hardware in built-in cabinets is made possible by by these unique blades. My only gripe, and it’s a big one, is the price–$75 for 3 blades. I’ve learned to be very careful not to use them when another tool will do the job. Even though they are made to cut through metal, striking a relatively thick nail, screw or bolt will ruin the blade very quickly. So if what you’re cutting is easy to get to, use your sawzall.

Love the tool, I own and operate a high volume door/millwork business. I use mine daily. The cost of the blades is way too high, but they can be re sharpened several times. There are several sharpening services in my area that sharpen everything from kitchen knives to bandsaw blades, the guy we use even comes to the jobsite to pick up the blades every few weeks and resharpens them right in his van. I use the metal+wood e-cut blades and the scraper blades almost exclusively. There is no other tool on the market that even comes close to performing like the multimaster, the cost to operate would make it too high if we did not sharpen our blades though.

After purchasing the Multimaster kit with multiple accessories, I was a little reluctant to use the E-cut blade for anything but wood. After a short time of usage, it was clear that I would need to cut through some nail embedded wood. I was shocked to see that blade was still sharp as new. I was sold immediately. I purchased additional blades only after I unknowingly cut through a couple drywall screws in a counter top. The blades’ teeth wore down from being razor-sharp to an almost toothless state. Believe it or not, I still use the blade when I’m not sure what is embedded in the wood and it still cuts! My suggestion for long life would be to avoid any hardened metal such as drywall screws, cut nails , etc and you’ll be happy with these blades.

Frequently Bought Together
Fein 63502113019 3-5/16-Inch Flush Cut Wood Blade
+
Fein 63502134025 2-1/2-Inch Standard E-Cut Blade, 3 Pack
+
Fein 63502097027 3 1/8-Inch Hard Material Blade for Sheet Metal, Hardwood, Fiberglass, and Carbon Fiber

Rockwell RK9000 Jawhorse

Brand: Rockwell
Feature

* The 1 ton clamping force provided by the jaws, which is foot-pedal operated, leaves both of your hands free to handle the material you are inserting
* A lock-release switch allows you to lock the material in place and easily release it with the flick of a switch
* Vice jaws extend to a full 37-inches – enough to clamp even the largest materials inlcluding a standard size 36-inch door
* Tripod base gives exceptional all-terrain stability; the front legs incorporate holes to allow you to fasten to a floor for more permanent jobs
* The Jawhorse quickly folds down (no tools needed) to a very portable 43 pounds and incorporate a wheel for even easier portability

Product Description
When you have a job to do that requires a second set of hands, you can turn to the . Whether you’re sheetrocking, setting fence posts, or constructing an outdoor playhouse for your children, this unique hands-free portable workstation will help you get the job done.

Jawhorse, Saw Horse With Clamp, Powerful Foot Operated Clamping Force Applies As Much Or As Little Clamping Pressure As Required, Tripod Base For All Terrain Stability, Lock Release Switch Allows Fast Release Of Jaw, Quickly Folds Down For Storage, Rear Leg Acts As Carry Handle, Front Has Transport Wheels For Easy Transport, 37″ Maximum Clamping Range, 220 LB Maximum Load, 39″ x 39″ x 34″ Standing Size, 29″ x 14″ x 13″ Folded Size.

Rockwell RK9000 Jawhorse Review
I purchased this Rockwell Jawhorse from Amazon a couple of weeks ago. Fast delivery and set it up in 2 minutes. Comes completely assembled. Never had a piece of equipment before that was a fold up piece and yet so amazingly sturdy. Used it the first day I received it and have more projects that it will be used on. This is a perfect unit for tradesmen in the field as it folds up very compactly and is easy to carry and place on a back floor or seat of most any kind of vehicle. It does everything the manufacturer says it does and more. I use a lot of jigs in my woodworking and this Jawhorse adds to their effectiveness.

The Jawhorse is well designed and especially sturdy! I do all my home remodeling and maintenance alone. It makes my projects easier and adds a significant margin of safety! I keep finding new things it will do and has become the first tool I set up even if it’s just used as a portable work table!

This is a well thought out and solidly built device. It is about 43 lbs. but has a built in roller for moving it around. After reading the small manual it is easy to operate. I wish they had enclosed more examples of uses and applications but the users will have no problem find uses for this thing. Only time will tell about durability but it appears tuff. I would tell any person who works with their hands to by one.

This is a well made, solid workplace tool, worthy of all its positive reviews. Setup and operation are both simple and intuitive. Basically, a ratcheting jaw (similar to the old car jack style) is used to provide clamping action. The jaw can be reversed on its slide so you can clamp wide items or close it completely, plus the jaw faces are surfaced with hard rubber pads and are wide and rigid enough to clamp items vertically. The ratchet is operated by a foot pedal. When pressed down at full clamp, you push a conveniently located switch on the front to lock the ratchet in place. Easily released catches allow the unit to be folded compactly for storage. For some reason a roller is built in for towing it around when folded up, which I find to be basically about as useful as your appendix although it might be useful for those with some kind of restricted motion issue. The third leg is easy to seat for making use of the unit, and easily pulls clear of its seat to pivot as needed when closing up the unit (it also serves as a tow bar for towing a closed up unit on its roller). It has a clamp down screw with a plastic encased turn down that will hold it tight if you turn hard enough. It’s not critical that it be turned tight, but is advisable.

I also purchase a companion piece, the Rockwell Jawhorse RK9109 Plywood Jaw Accessory Attachment, and for my purposes it’s been well worth it. It’s simply a replacement jaw for the one that comes with the Jawhorse, but in contrast provides a significantly wider opening. It’s too long to be reversed, so you still need both jaws. Sliding a jaw on or off the unit is quite easy, so that’s not an issue with using it. To fully support something as big as a 4×8 sheet of plywood, you need to add outriggers or use some other means to support the overhang (hardly surprising). The accessory comes with 2 clamps appropriate for producing outriggers from 2×2 or 2×4 stock (think in terms of the outriggers as being an 8′ piece with legs clamped to each end … the outriggers’ cross piece sits inside the clamp’s jaws to support the plywood’s overhang).

Frequently Bought Together
Rockwell Jawhorse RK9109 Plywood Jaw Accessory Attachment
+
Rockwell Jawhorse RK9101 Log Jaw Accessory Attachment
+
Rockwell RK5102K Sonicrafter Deluxe 72-pc Kit

Black & Decker FSMVC 9.6-Volt to 18-Volt Slide Style Battery Charger

Brand: Black & Decker
Feature

* Charges 9.6, 12.0, 14.4, and 18-volt NiCad battery packs
* Charges batteries in under 90 minutes
* Rough and tough plastic construction
* Weighs 14.7 ounces
* Includes a 2-year warranty

Product Description
Firestorm, 9.6V – 18.0V, Fast Charger, Charges All Firestorm & Black & Decker Spring Loaded Style Batteries.

The convenience of using cordless tools can be compromised if you’re always standing around waiting for the batteries to recharge. To get you up and running quicker, with less down time, Black & Decker has developed the FSMVC 9.6-Volt to 18-Volt Fast Charger. This cleverly designed plug-in charger accepts a wide range of nicad batteries, including 9.6, 12, 14.4, and 18-volt packs. And it will recharge a battery in less than 90 minutes, as compared to the average three-hour recharge time of the chargers that came with the tools. The FSMVC 9.6-Volt to 18-Volt Fast Charger accepts all Black & Decker and Firestorm spring-loaded (slide-in) type batteries.

What’s in the Box:
Black & Decker 9.6-Volt to 18-Volt Fast Charger

Black & Decker FSMVC 9.6-Volt to 18-Volt Slide Style Battery Charger Review
I have a set of 18-volt Black & Decker yard tools (hedge trimmer, line trimmer, and blower) that came with a regular slow charger. By the time I get about 2/3 done with any yard work, all 3 of my batteries are empty. I work through one battery at a time and drop it on the charger as I grab the next one. But the regular charger just can’t do it fast enough. So I was thrilled to find the Black and Decker fast charger. It works great! Now when my battery runs out while I’m doing yard work, I stick it on the fast charger and by the time the third one is emptied, the first one is charged again. Hooray!

This 90 minute charger sometimes indicates that it is charging for 6+ hours on a brand new battery. Generally it works fine and does charge my batteries in about an hour but there are those few times that just sits there and just blinks away for hours saying that it is charging. Because of this, I never use it unattended. The batteries that it tried to charge for a long time got pretty hot but probably still well within the safe zone. It just made me nervous enough to only use it while I am home.

We have both 14v and 18v B & D drills. The charger on the 14v quit working. When I saw this charger, I liked that it can charge both of our battery sizes. Also, my husband had always left the batteries charging for far longer than was recommended. This charger does the job in 90 minutes and then puts the battery in a storage mode so that it is not over charged. Well worth the money even if your B & D charger is still working.

I am somewhat of the “Impatient” type of people that can’t wait, what seems to be forever, to re-charge a Ni-Cad battery using the charging device supplied with your tool purchase. I found this charger and said, “I’ve got to give it a try.” What a great decision! Simple to use and I haven’t really timed it but it has to be 3x times faster than the cheap re-chargers I mentioned above AND it gives you a full charge. Do yourself a favor that you won’t regret. Excellent unit for the price and Amazon had it to me a day before I was expecting it to arrive.

The charger is described by its manufacturer as being for all black and decker 9.6 – 18 volt batteries, when it is not. The charger does not work with certain newer batteries that have 4 prongs to them, just “older” ones with 3 or 2 prongs. A call to B&D support got me a reply that the charger doesn’t work with the 4 prong batteries (which BTW have the same part number no matter how many prongs) and that I should return the item as it doesn’t do what its advertised to. So, if your tools use the 2 and 3 prong batteries, this charger is GREAT. If your tools use the 4 prong batteries, save your time and aggravation and just charge them with the slow chargers that came with the tools. Beware buying extra battery packs as you cant tell till you get the package open if the batteries have 2, 3 or 4 prongs and the 4 prong ones dont fit into the older tools either!

Frequently Bought Together
Black & Decker FSB18 FireStorm 18-Volt NiCad Slide Style Battery
+
Black & Decker CCS818 18-Volt Cordless Electric Chain Saw
+
Black & Decker HPB18-OPE 18-Volt Spring Loaded Slide Pack Battery For 18-Volt Outdoor Cordless Power Tools